FD80D Industrial Compact Pressure Transmitter: Compact Design, Stable Measurement & Flexible Communication
Product Details
1. Introduction
The FRD Sensor FD80D Industrial Compact Pressure Transmitter is designed for reliable pressure measurement in industrial applications. Its compact design makes it suitable for equipment integration, process monitoring and industrial automation systems.
With a measurement range of 0–100 kPa to 7 MPa, 0.25% F.S. accuracy and MODBUS RTU / HART communication, FD80D provides a practical solution for applications requiring stable pressure measurement and flexible system integration.
2. Why Choose This Model?
Industrial pressure measurement may face challenges such as limited installation space, unstable readings, measurement drift and difficult system integration.
FD80D addresses these needs with:
- Compact Design: Suitable for equipment with limited installation space.
- Stable Measurement: 0.25% F.S. accuracy with 0.2% F.S./year long-term stability.
- Flexible Communication: Supports MODBUS RTU and HART protocols.
- Wide Measurement Range: 0–100 kPa to 7 MPa.
- Multiple Output Options: Supports 4–20 mA and 1–5 V DC.
- Industrial Protection: IP65 protection for demanding industrial environments.
3. Model Comparison Table
| Parameter | FRD Sensor FD80D | WIKA A-10 | H******l PX3 Series |
|---|---|---|---|
| Product Type | Industrial Compact Pressure Transmitter | Pressure Transmitter | Heavy-Duty Pressure Transducer |
| Measurement Range | 0–100 kPa to 7 MPa | Model-dependent | Model-dependent |
| Pressure Type | Gauge Pressure | Gauge / Absolute | Gauge / Absolute |
| Accuracy | 0.25% F.S. | Up to ±0.25% F.S. | Up to ±0.25% F.S. |
| Overload Pressure | 1.5 × F.S. | Model-dependent | Model-dependent |
| Long-Term Stability | 0.2% F.S./Year | Model-dependent | Model-dependent |
| Operating Temperature | -20°C to 70°C | -30°C to 100°C | -40°C to 125°C |
| Power Supply | 18–30 VDC | 8–30 VDC | 8–30 VDC |
| Output Signal | 4–20 mA / 1–5 V DC | 4–20 mA / 0–10 V / 1–5 V, etc. | 4–20 mA / 0–5 V / 0–10 V, etc. |
| Communication Protocol | MODBUS RTU / HART | Model-dependent | Model-dependent |
| Electrical Connector | GDM / M12×1 Aviation Plug | Model-dependent | Model-dependent |
| Protection Level | IP65 | Up to IP67 | Up to IP67 |
| Typical Applications | Industrial Automation, Equipment Integration, Process Monitoring | Industrial Machinery & Process Applications | Industrial, HVAC & Transportation |
| Warranty | 12 Months | — | — |
4. FRD Sensor FD80D OEM & ODM Customization Services
FRD Sensor provides flexible OEM & ODM customization services for FD80D to meet different equipment integration and pressure measurement requirements.
Customization options include:
- Measurement range
- Pressure type
- Output signal
- Communication protocol
- Electrical connector
- Mechanical configuration
- OEM labeling
These options allow equipment manufacturers, automation companies and system integrators to efficiently integrate FD80D into different industrial applications.
5. FRD Sensor FD80D Industrial Compact Pressure Transmitter Measurement Accuracy Troubleshooting Guide
When FD80D shows abnormal pressure readings or measurement deviation, follow these steps:
Step 1: Check the Power Supply
Verify that the supply voltage is stable and within the specified 18–30 VDC range.
Step 2: Check the Pressure Connection
Inspect the pressure port and connection for leakage, blockage or improper installation.
Step 3: Check the Zero Point
Under the specified reference conditions, verify whether the transmitter has zero-point deviation.
Step 4: Check the Output Signal
Check whether the 4–20 mA or 1–5 V output corresponds correctly to the applied pressure.
Step 5: Check Communication & Configuration
Verify the MODBUS RTU or HART communication and confirm that the measurement range and configuration parameters are correct.
If the problem persists, contact FRD Sensor for technical support.
7.Conclusion
The FRD Sensor FD80D Industrial Compact Pressure Transmitter combines a compact design, 0.25% F.S. accuracy, stable long-term performance and MODBUS RTU / HART communication for reliable industrial pressure measurement.
It is suitable for industrial automation, equipment integration and process monitoring, especially where compact installation and flexible communication are required.
-
FD-10C Embedded Snap On Cover Temperature & Humidity Transmitter 316L Stainless Steel Monitor
The FD-10C embedded snap-on cover temperature & humidity transmitter is an industrial-grade monitoring device customized for clean scenarios. -
Cleanroom Environmental Monitoring Stainless Steel Embedded Micro 4-20mA/RS485 For Medical / Fume Detection
FD820C embedded micro differential pressure transmitter is customized for micro-differential pressure detection in critical application environments. The digital technology used in this product is the latest application result in the field of sensor manufacturing. -
Embedded Micro Differential Pressure Temperature Humidity Transmitter With High Accuracy 4-20mA/RS485 Output
FD820C embedded micro differentialpressure transmitter is customized for micro-differential pressure detection in critical application environments. The digital technology used in this product is the latest application result in the field of sensor manufacturing. -
FD820C Embedded Micro Differential Pressure Transmitter: Accurate Low Differential Pressure Measurement for Demanding Applications
1. Introduction The FRD Sensor FD820C Embedded Micro Differential Pressure Transmitter is designed for low differential pressure measurement and embedded equipment integration , with a measurement range of 0–100 Pa to 2500 Pa . With a compact design, 4–20 mA and RS485 + Relay outputs, and MODBUS RTU ...
